Instructions to Remove Links from an Omega Watch

Omega Watch is more than expensive swiss watches made while only it is sized properly the watch can look its best. Here are some instructions for re-size the watch before it can be worn.Step 1Line up the drift pin with a pin located in the watch's links and then turn the screw to take one end of the bracelet off from the connection at the Piaget replica watches ?face. Step 2Find the locking sleeve located in the center section of the bracelet. You will see that there is a notch on each end. On one end of the pin there is a small crimp that will correspond with the bracelet. Pull on the crimp to remove the pin.Step 3Remove the link that is associated with the pin you just removed. Insert the pin back into link. Make sure the holes are aligned. It is important that the crimped end goes in last.Step 4Push the pin back into place by using a hard surface like a nail file or Popsicle stick. After ensure all the holes are aligned then carefully insert the pin slowly. Step 5Make sure the links are in place, which can be done by giving a couple of slight tugs on the links. Now You have successfully removed and replaced links on your OmegaEbel watches.